CITB Test for MAP
Mock Test 1

(52 Questions / 45 Min)

Take a mock CITB Test for MAP and Specialists and check your knowledge.

58

Note:
 No Discussion Allowed

 No Communication Devices Allowed

Time Duration: 45 min

Oops.. Time is up, Here are your results.


MAP Mock Test 1

1 / 52

1) What action should you take when you need to walk past someone operating a mobile crane?

2 / 52

2) What is a common fire risk on construction sites?

3 / 52

3) In addition to heat, what other two factors must be present to start a fire?

4 / 52

4) Which of the following is not an immediate health effect of exposure to paints and resins with high levels of solvents?

5 / 52

5) When assessing the competence of a demolition contractor, which approach is most advisable?

6 / 52

6) If you discover a fire, what is the first thing that you should do?

7 / 52

7) In case of uncertainties about the stability of a structure slated for demolition, which two of the following would be considered qualified to offer assistance?

8 / 52

8) A large fire has been reported. You have not been trained to use fire extinguishers. What should you do?

9 / 52

9) When accessing your work area and the quickest route is through a contractor’s vehicle compound, what action should you take?

10 / 52

10) What must be checked before working in a corridor that is a fire escape route?

11 / 52

11) Which of the following should be labelled with this sign?

12 / 52

12) What is the primary purpose for an inexperienced client to seek the assistance of a demolition engineer or consultant?

13 / 52

13) What is the primary task for workers upon arriving at the site?

14 / 52

14) You've witnessed an accident on your site and are scheduled for an interview with a Health and Safety Executive (HSE) inspector. What is the appropriate action?

15 / 52

15) If you discover that a design detail cannot be constructed according to the plans, what are the recommended actions to take?

16 / 52

16) What are the potential consequences if a worker neglects to report a near miss?

17 / 52

17) Following observation of your work, a Health and Safety Executive (HSE) inspector has issued an improvement notice. What does this signify?

18 / 52

18) What is the definition of the term 'hazard'?

19 / 52

19) Under the Control of Substances Hazardous to Health (COSHH) regulations, what steps should be taken if an employee is exposed to a hazardous chemical substance on site?

20 / 52

20) Why is it the employer's legal obligation to communicate health and safety matters with employees?

21 / 52

21) What are two potential outcomes for you if your employer fails to prevent accidents and ensure health and safety at work?

22 / 52

22) Which role holds the responsibility for overseeing health and safety on-site?

23 / 52

23) Which of the following occupational diseases is exempt from reporting under the Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations (RIDDOR) 2013?

24 / 52

24) The entire premises received a prohibition notice. What does this indicate?

25 / 52

25) You have been asked to do some work that will create dust. What should you do?

26 / 52

26) Which specific form number needs to be presented to the enforcing authority for the reporting of a reportable occupational illness or disease?

27 / 52

27) What is the best way to limit exposure to dust when using a power tool?

28 / 52

28) What is the primary purpose of understanding the fire and emergency procedures on-site?

29 / 52

29) Which specific form number needs to be presented to the enforcing authority for the reporting of a reportable occupational illness or disease?

30 / 52

30) Which immediate hazards will affect the pedestrians if someone uses a petrol cut-off saw (disc cutter) to cut concrete blocks near pedestrians?

31 / 52

31) What is the main cause of long-term health issues in the construction industry?

32 / 52

32) Which specific form number needs to be presented to the enforcing authority for the reporting of a reportable occupational illness or disease?

33 / 52

33) Identify the most severe risk faced by a worker when wearing only the mentioned items of personal protective equipment (PPE).

34 / 52

34) After asbestos, which of the following causes the most ill health to construction workers?

35 / 52

35) Upon discovering pigeon droppings and nests in your designated work area, what should be your course of action?

36 / 52

36) Which of the following activities does not create harmful silica dust?

37 / 52

37) What is the primary risk for a worker wearing only these specific items of personal protective equipment (PPE)?

38 / 52

38) Why is it advisable to spray water on rubble before clearing it up inside a building?

39 / 52

39) After identifying that a hazardous incident occurred due to insufficient sealing of a gasway, which form should the responsible person fill out?

40 / 52

40) When using a cut-off saw to cut concrete, how should water be used to reduce dust levels?

41 / 52

41) While walking across the site, what's the safest method to prevent an accident involving mobile plant?

42 / 52

42) During which scenario is a site vehicle most likely to injure pedestrians?

43 / 52

43) For what reason should you avoid walking behind a reversing lorry?

44 / 52

44) What action should you take upon discovering numerous old bird nests and droppings in your work area?

45 / 52

45) What action should you take upon discovering numerous old bird nests and droppings in your work area?

46 / 52

46) Under what circumstances is site transport permitted to travel along a pedestrian route?

47 / 52

47) How should workers approach the handling of dust?

48 / 52

48) While walking on site, a large, mobile crane is reversing across your path. What is the appropriate action to take?

49 / 52

49) When walking past a 360° mobile crane operating near a wall, what is the primary risk?

50 / 52

50) A forklift truck is obstructing the path you need to take on-site while lifting materials onto a scaffold. What should you do?

51 / 52

51) Where are you likely to be exposed to the highest quantities of dust when drilling, cutting, sanding, or grinding?

52 / 52

52) How should a container, or any residue, be disposed of if it has this sign on the label or packaging?

Scroll to Top