Operatives- Mock Test 10

CITB Test for Operatives
Mock Test 10

(50 Questions / 45 Min)

Take a mock CITB Test for MAP and Specialists and check your knowledge.

Note:
No Discussion Allowed

No Communication Devices Allowed

Time Duration: 45 min

Oops.. Time is up, Here are your results.

CITB Opratives Mock Test 10

1 / 50

1) What should you do if you discover a damaged power tool on a construction site?

Keep using it, but be more careful

Report it to your supervisor and stop using it

Try to repair it on your own

Share it with your colleagues

2 / 50

2) What does "RIDDOR" stand for in the context of reporting accidents and incidents on a construction site?

Risky Incidents Demanding Documentation on Occupational Risks

Reporting of Injuries, Diseases, and Dangerous Occurrences Regulations

Reducing Industrial Dangers through Data Oversight and Regulations

Regular Inspection of Dangerous Duties and Occupational Risks

3 / 50

3) What should you do when using a pneumatic nail gun on a construction site?

Point it at your coworkers to have some fun

Use it without safety goggles

Keep your finger on the trigger at all times

Maintain control and aim it away from your body and others

4 / 50

4) Why is it important to mark and secure trip hazards on a construction site?

To create obstacles for fun

To prevent workers from leaving the site

To reduce the risk of accidents and injuries

To challenge workers to navigate the hazards

5 / 50

5) What should you do if you discover damaged or frayed electrical cords on a construction site?

Continue using them with caution

Repair them yourself

Report them to your supervisor and stop using them

Ignore them and hope for the best

6 / 50

6) What should you do when using a ladder on a construction site?

Lean the ladder against a fragile surface

Overreach while on the ladder

Keep both feet on the same rung

Maintain three points of contact with the ladder

7 / 50

7) When is it safe to remove the guard from a power tool?

Always, as it makes work easier

Only when your supervisor approves

Never, unless the tool is designed to be used without a guard

When the tool is malfunctioning

8 / 50

8) Why is it essential to conduct regular safety inspections on a construction site?

To increase the workload of supervisors

To ensure that tools and equipment are working correctly

To slow down the work process

To identify and correct safety hazards

9 / 50

9) What should you do if you encounter an unidentified substance on a construction site?

Touch it to determine its properties

Taste it to identify the substance

Avoid contact and report it to your supervisor

Use it in your work without any precautions

10 / 50

10) What should you do if you notice an unattended open excavation on a construction site?

Jump in for a quick exploration

Use it as a storage area for your tools

Secure it and report it to your supervisor

Pretend it"s not there and continue working

11 / 50

11) What does "COSHH" stand for in the context of construction safety?

Central Occupational Safety and Health Headquarters

Comprehensive Occupational Standards for Health and Hygiene

Control of Substances Hazardous to Health

Construction Operations for Safe Handling and Hygiene

12 / 50

12) What does "HSE" stand for in the context of health and safety in the UK construction industry?

Health and Safety Executive

High-Speed Equipment

Hazardous Substance Evaluation

Home Safety Education

13 / 50

13) What is the minimum recommended safe distance for heavy machinery operating on a construction site?

1 foot

10 feet

50 feet

100 feet

14 / 50

14) Which of the following is a common hazard associated with working in confined spaces on a construction site?

Fresh air and sunlight

Limited access and ventilation, leading to a risk of suffocation

Spacious work areas

Frequent breaks and relaxation

15 / 50

15) What should you do if you encounter a gas leak on a construction site?

Ignore it, as it"s common in construction

Report it to your supervisor and evacuate the area

Attempt to fix the gas line yourself

Light a cigarette to see if the gas is flammable

16 / 50

16) Which of the following PPE (Personal Protective Equipment) items is typically required when working on a construction site?

Wristwatch

T-shirt

Hard hat

Flip-flops

17 / 50

17) What is the purpose of a safety harness on a construction site?

To keep tools and equipment secure

To prevent falls and protect the worker

To hang banners and flags

To carry heavy loads

18 / 50

18) What should you do if you encounter an unattended excavation on a construction site?

Fill it with construction debris to make it safer

Ignore it and continue walking

Report it to your supervisor or the site manager

Use it as a shortcut to your work area

19 / 50

19) What should you do if you encounter asbestos-containing materials on a construction site?

Ignore them and continue working

Immediately report it to your supervisor

Collect a sample for personal use

Remove the materials without any protective gear

20 / 50

20) What is the main purpose of conducting a "site induction" for workers on a construction site?

To assign job roles and responsibilities

To introduce workers to each other

To familiarize workers with site-specific health and safety rules and procedures

To distribute construction materials

21 / 50

21) Which of the following is NOT a common type of scaffolding used in construction?

Single-pole scaffolding

Cantilever scaffolding

Cantilever scaffolding Mobile scaffolding

Volatile scaffolding

22 / 50

22) What is the purpose of a method statement on a construction site?

To share personal opinions with coworkers

To document how a specific task will be carried out safely

To list the workers" daily schedule

To report accidents and incidents

23 / 50

23) What is the main reason for using guardrails on elevated work platforms?

To provide shade

To hold materials

To prevent falls

To attach lights for night time work

24 / 50

24) What is the primary function of a fire warden on a construction site?

To start fires as part of fire safety training

To oversee firework displays

To raise fire alarms and assist in evacuations in the event of a fire

To extinguish fires using their superpowers

25 / 50

25) What is the primary purpose of a "working at heights" permit on a construction site?

To reserve a spot for skydiving during lunch breaks

To allow workers to perform tasks at elevated positions safely

To schedule workers for rooftop sunbathing

To coordinate helicopter landings on the site

26 / 50

26) What does the term "PPE" stand for in the context of construction safety?

Professional Painting Equipment

Personal Protective Equipment

Public Property Examination

Private Property Evaluation

27 / 50

27) What is the purpose of a "Permit to Work" system on a construction site?

To issue permission for workers to take breaks

To authorize access to restricted areas

To grant employees paid time off

To ensure the project is on schedule

28 / 50

28) What is the purpose of "trench boxes" on a construction site?

To store construction materials

To create temporary shelter for workers

To protect workers from cave-ins in excavatio

To transport workers to various job sites

29 / 50

29) What is the primary purpose of a "confined space permit" on a construction site?

To reserve spaces for management meetings

To designate areas for break time

To ensure safe entry and work within confined spaces

To control access to the restroom facilities

30 / 50

30) Which of the following should be done in the event of a fire on a construction site?

Run to the nearest exit

Attempt to put out the fire yourself

Call the emergency services and evacuate the area

Continue working as usual

31 / 50

31) Which of the following is NOT a common type of scaffolding used in construction?

Single-pole scaffolding

Cantilever scaffolding

Mobile scaffolding

Volatile scaffolding

32 / 50

32) When should you wear high-visibility clothing on a construction site?

Only during night time work

When working in areas with moving vehicles or equipment

Never, as it"s optional

When the weather is cold

33 / 50

33) What type of fire extinguisher is suitable for electrical fires?

Water fire extinguisher

Foam fire extinguisher

CO2 (carbon dioxide) fire extinguisher

Powder fire extinguisher

34 / 50

34) When should you use a ladder on a construction site?

Whenever you feel like it

Only when there are no alternative methods for the task

When you want to take a break

At the end of the workday

35 / 50

35) When working with power tools, what should you do to minimize the risk of electric shock?

Plug and unplug the tools with wet hands

Always use the tools with the power switched on

Keep the tools away from water and wet conditions

Dip the tools in water for lubrication

36 / 50

36) What is the primary purpose of a toolbox talk on a construction site?

Share the latest sports news with colleagues

Discuss upcoming company events

Brief workers on safety-related topics

Distribute tools to workers

37 / 50

37) In the event of a gas leak on a construction site, what is the first step you should take?

Light a match to identify the source of the leak

Immediately evacuate the area and call emergency services

Use your cellphone to record the leak for documentation

Attempt to repair the gas line yourself

38 / 50

38) What is the primary function of a fall arrest system?

To prevent tools from falling

To catch workers if they fall from heights

To secure construction materials

To control traffic on the site

39 / 50

39) What is the primary purpose of safety signs and labels on a construction site?

To decorate the site

To provide directions to nearby restaurants

To warn workers and visitors of potential hazards

To display motivational quotes

40 / 50

40) What should you do if you encounter a gas leak on a construction site?

Ignore it, as it"s common in construction

Report it to your supervisor and evacuate the area

Attempt to fix the gas line yourself

Light a cigarette to see if the gas is flammable

41 / 50

41) What is the purpose of a Safety Data Sheet (SDS) on a construction site?

Provide the contact information of the site manager

List the prices of construction materials

Offer guidance on handling hazardous substances

Display the daily weather forecast

42 / 50

42) What should you do if you notice a coworker not wearing the required PPE on the construction site?

Ignore it, as it"s their choice

Politely remind them of the safety rules and report the issue to your supervisor

Make fun of them to encourage compliance

Take off your own PPE to show solidarity

43 / 50

43) What does the term "NEBOSH" stand for in the context of health and safety qualifications?

National Examination Board in Occupational Safety and Health

New Equipment for Building Operations and Safety Hazards

No Entry Beyond Occupational Safety Hazards

Non-Experienced Builders of Occupational Safety and Health

44 / 50

44) When using a ladder, how should you position it to ensure safety?

At any angle that feels comfortable

With the top resting against a fragile surface

With the base at least one-quarter of the ladder"s working length away from the wall or surface

Horizontally on the ground

45 / 50

45) When is it appropriate to remove your hard hat on a construction site?

When you are inside a building

When you want to cool off

Never, except in designated safe areas

When your hair looks good

46 / 50

46) Which of the following should be done in the event of a fire on a construction site?

Run to the nearest exit

Run to the nearest exit Attempt to put out the fire yourself

Call the emergency services and evacuate the area

Continue working as usual

47 / 50

47) Which of the following is NOT considered a common hand and power tool used in construction?

Circular saw

Screwdriver

Jackhammer

Lawnmower

48 / 50

48) What is the primary purpose of scaffolding on a construction site?

To provide shade for workers

To create a viewing platform for supervisors

To provide a stable working platform at various heights

To store construction materials

49 / 50

49) Which of the following is NOT a common hazard when working at heights on a construction site?

Falling from an elevation

Overexposure to sunlight

Being struck by falling objects

Structural collapses

50 / 50

50) What is the role of a "banksman" on a construction site?

To manage the financial accounts of the construction company

To direct and guide vehicle movements, especially during lifting operations

To serve as the construction project"s entertainment coordinator

To supervise the canteen and food services

CITB Test for Operatives
Mock Test 10

(50 Questions / 45 Min)

CSCS Cards

Construction Qualification

Services

CITB Test

CSCS Card

Support

Company

CITB Test for OperativesMock Test 10

(50 Questions / 45 Min)

CSCS Cards

Construction Qualification

Services

CITB Test

CSCS Card

Support

Company

CITB Test for Operatives
Mock Test 10