1) Where should a sign showing how many people can use a passenger hoist be placed?

2) What should be verified when a tower crane is used near an airport?

3) How should workers be allowed to enter a riser shaft?

4) Which equipment is utilised alongside a cable avoidance tool (CAT) for detecting cables?

5) What is the right way to store cylinders with liquefied petroleum gas (LPG)?

6) Why is edge protection used?

7) How many employees must be present before the significant findings of risk assessments must be documented?

8) Which colour cable indicates a 415V supply?

9) How can you avoid buying fake personal protective equipment (PPE)?

10) Welding operations are about to commence on your site. What should be employed to shield passers-by from the arc eye?

11) At what decibel (dBA) level does it become mandatory for an employer to establish hearing protection zones?

12) What does the Beaufort Scale measure?

13) If your company is the main contractor on a project under current Construction (Design and Management) Regulations, you may work closely with the CDM coordinator because they are legally responsible for:

14) How can you prevent a dumper from tipping into an excavation?

15) Who is accountable for creating the construction phase plan?

16) How should you operate the inflation pump when using airbags with a controlled leak rate for fall arrest?

17) What is the best way to safely fill in after digging up underground pipes?

18) What major danger do workers encounter when digging near a building or structure?

19) "Q:
According to the current Construction (Design and Management) Regulations, which document must be provided to the client upon completion of the construction phase?"

20) Employers must avoid exposing workers to harmful substances whenever possible. If complete prevention is not feasible, what should be focused on first?

21) What is the danger of leaving someone in a harness for a long time after they fall?

22) What does a daily or weekly personal noise exposure of 87 decibels (dBA) mean?

23) What is a significant risk when digging near a building or structure?

24) Why is using a Residual Current Device (RCD) with 230-volt tools advisable?

25) In the colour coding system for electrical power supplies on site, which voltage does a blue plug indicate?

26) What is the purpose of using a ‘permit to work’ system?

27) How can you verify if an RCD (safety switch) connected to a power tool functions properly?

28) What is the maximum size allowed for a gap without protection on a scaffold?

29) What is the biggest benefit of using a safety net instead of a harness and fall-arrest lanyard?

30) When is it necessary to install guardrails on a working platform?

31) What is the minimum level of first-aid provision required at any workplace?

32) When considering ways to protect people from health and safety risks, how should personal protective equipment (PPE) be considered?

33) Where should an emergency escape route lead you to?

34) With 35 employees on-site, what is the recommended first aid provision?

35) Under the Work at Height Regulations, how quickly should a scaffold inspection report be provided to the responsible person?

36) Where is the ideal place to rig a safety net?

37) Which document is essential to consult when preparing a COSHH assessment for a hazardous substance or product?

38) Which of these options represents a fall-arrest system?

39) What information does a COSHH assessment provide?

40) How can a supervisor or manager effectively ensure workers comprehend a method statement?

41) If a worker informs you they have work-related hand-arm vibration syndrome (HAVS), where should this information be reported?

42) Which of the following should be considered as a final option to ensure a worker's safety when working at heights?

43) If a subcontracted worker is 17, what should the employer ensure is provided?

44) Before starting a lift operation, where should you ensure the steps are documented to ensure they are done safely?

45) What is the function of the health and safety file in a construction project?

46) According to the current Construction (Design and Management) Regulations, how often must a supported excavation be inspected?

47) Which of the following is not required when issuing a worker with Respiratory Protective Equipment (RPE)?

48) What risk occurs when too much oxygen is in a small enclosed area?

49) Where can you find information about the welfare facilities required on a construction site?

50) What action should you take if workers above a safety net are dropping off-cut materials and debris into the net?